Product Description

Application scope:

Widely used in BLS(BACK LIGHT SHEET), BLU, PCB, FPCB, PDP, OLED, LCD, PVC, CD-ROM, FILM, GLAS, SILK PRINTING, MEMBRANE, METAL etc sheet cleaning.

 

Specification:

1. Remove dirt by using ion pump sticky paper, efficient and convenient to remove static and dust

2. Anti-roll device, not easy to fold, roll and scratch the board.

3. The axle side separation device is adopted for easy cleaning and replacement.

4. Dust-removing glue sticks with special materials can be adjusted up and down, suitable for different thickness products to achieve the best dust removal effect.

5. The transmission mode and transmission speed can be set as needed according to requirements and more flexible by sensor.

6. The conveyor belt is an O-ring conveyor belt.

7. Three layer drawer type, can be pulled sideways, easy to replace and maintain the consumable system.

8. There is no need to stop when replacing or cutting the adhesive roller.

9. Clean both sides at the same time.

10. The conveying section can be added to the inlet and outlet ends.

11. The upper part of the inlet and outlet are equipped with static elimination function devices.

12. 4 sticky roller + 2 sticky paper roller, perfect cleaning effect.

13. Equipped with counter + buzzer + warning light.

14. The direction of operation can be arbitrarily selected by the forward and reverse switch.

15. Round-trip cleaning is optional.

 

Parameter:  

Model	KLP-650
Dust removal direction	Double side
Max. width of material	650mm
Material thickness	0.125~4mm
Method of de-ionizing	AC corona discharge static electricity removal system
Dust removal rate	≤5um dust particle removal rate 99%
Working height	870±50mm
Cleaning speed (mm/sec)	0~30M/Minute
Air supply(Kg/c㎡)	3~5
Electric Source	110/220~240V*50/60HZ*1Ph 800W
Weight	150KG
Dimension	1550*1071*1459mm

Payment Terms︰ TT/LC/DP/DA